• November 16, 2017 /  Architecture
    home18

    Traditional clock generators use a simple integer-N phased-locked loop (PLL)-based architecture. The output clock frequency is a function of the input clock frequency and the PLL divider values as shown in the equation
    Equation: fOUT = fIN.N/P.R
    Traditional single PLL-based IC solutions are suitable for simple integer clock multiplication of reference inputs or clock generation from crystal inputs. However, many applications require clock generation of multiple non-integer-related frequencies (e.g., 125 MHz Ethernet and 106.25llMHz Fibre Channel). Traditional solutions require that the crystal frequency be changed to support each unique frequency plan. This forces the designer to use one or more custom crystals and multiple clock generator ICs to generate the required set of frequencies, increasing the cost, complexity and power consumption of the overall solution.

    New Any-Rate Clock Multiplier Architecture Simplifies Design
    Recent advances in mixed-signal analog design have made it possible to provide any-rate frequency synthesis from a single device. Silicon Labs newest clock architecture leverages a fractional-N PLL used in concert with a low-jitter fractional divider termed MultiSynth to produce any-rate frequency synthesis on multiple output clocks. The flagship of this new product family is the Si5338 Any-Rate, Any-Output Quad Clock Generator. This technology dramatically simplifies timing architectures by integrating the frequency synthesis capability of four PLLs in a single device, greatly reducing size and power requirements compared to traditional solutions.

    MultiSynth Technology
    The Si5338s low phase noise, high-frequency VCO supplies a high-frequency output clock to the MultiSynth block on each of the four independent output paths. The first stage of the MultiSynth architecture is a fractional-N divider, which switches seamlessly between the two closest integer divider values to produce the exact output clock frequency with 0 ppm error. To eliminate phase error generated by this process, the MultiSynth calculates the relative phase difference between the clock produced by the fractional-N divider and the desired output clock and dynamically adjusts the phase to match the ideal clock waveform. This novel approach makes it possible to generate any output clock frequency without sacrificing jitter performance. Based on this architecture, each output clock can be individually programmed to generate any frequency from 0.16 to 350 MHz, and select frequencies to 700 MHz. Typical jitter performance enabled by this MultiSynth-based architecture is 1 ps RMS.

  • November 9, 2017 /  Architecture
    images3

    Architectural Evangelist is a one of a kind architectural newsletter broadcasting the message of the cause, effect and need for innovation in the field of architecture. It is the brain child of a team of designers, architects, content developers,and technicians. We are speaking to architects, students, builders, interior designers/decorators and re-modelers. Architectural Evangelist braces the change of seasons with our centralized them of spring in the first issue. Our aim is to maintain Architectural Evangelist as a quarterly issue, with news and updates about the business of offshoring, architecture and design; How Tos; creative inputs from design experts, technical professionals and industry gurus; and articles, resources and everything in between.

    Spring/Summer 08 design tips for your home
    Color, breeze and sunshinethats what comes to mind when you say spring. Design tips for your home that can make any ordinary room into a fun, cozy haven This spring spruce up for a breath of fresh air to sweep through your living spaces with Architectural Evangelists design ideas and tips that spell spring like nothing else can.

    Going green
    Building and construction have a great effect on the environment. In the United States alone buildings alone account for 40-49% energy consumption, 25% of water consumption, 70% of total energy consumption and 38% of total carbon dioxide emissions. Green building information, tips and trends.

    The new face of outsourcing
    In this age of competition, companies are increasingly turning to specialization for improving cost and time feasibility and increasing efficiency. With knowledge intensive areas entering the fray, it allows organization the flexibility and provides the resources for the business growth of the organization
    How to tip: Choosing the right offshore services provider
    To build long term relationships with offshore service provider you need to play detective and find out all you can about the organization first. Heres what you need to know

  • October 21, 2017 /  Architecture
    home8

    With the extensive advancements in technology, the process of construction and architecture have become more organized and streamlined. A highly precision and technology driven process, BIM modeling consists of steps for generating as well as managing digital blueprints of a building, irrespective, of its nature whether a factory, hotel, office or any other form of physical structure. The process of digitizing important data relevant to the construction of a building, aids decision-makers to make critical judgments and evaluations about modification across its lifespan including in habitation, operation, and demolition. It is now highly appreciated by architects, civil engineers, constructors and others occupied in construction of a building and infrastructure sector across the globe.

    To carry out the entire project management in an effective manner, a BIM Manager or a VDC Project Manager takes control of the entire process. In projects, they work in co-ordination with Design Construction Team on behalf of the client. However, companies are also hiring BIMs at different stages of the project delivery and handling. Thus, the intensive level of dynamism and ease of customization provided by converting these important data into a suitable digital format, construct multifunctional structure on the surface. The engineering solutions offered by expert companies are now preferred by every construction firm for their projects.

    A revelation to traditional building design systems that were initially dependent on two-dimensional drawings of building sections, plans, elevation and other parts, digitization of maps offers numerous advantages. It offers updated technology which include the 3D maps and introduction of factors such as time and cost as an essential part of the project data, the other two important dimensions to modern day digitized maps of home and offices.

    It not only included, geometric calculations into building maps but also comprised of other factors as mention of surface space, geographic study, building material study, ergonomics, green building, light analysis, etc. which were neglected earlier. This provides an efficient solution for building construction in the hands of architects and engineers.

    Many companies specializing in Engineering Design Services ensure that they make use of this sophisticated technology to offer customized solutions as per the construction concepts, ideas, and design requirements put forth by clients. The design tool of this building solution presents the different views of a building model for construction and other usages of the building. In this model, a slight change in a one object of the model or design, automatically, changes other dependent model and an architect do not need to break model for every change.

    The author is an experienced Content writer and publisher for Business Development. Visit us to know more about Engineering Design Services, BIM modeling and Digitization of maps.

  • October 20, 2017 /  Architecture
    home1

    Interior architecture can be seen as different from architecture in that the interior rooms, halls, doorways + stairs can be re designed once the initial design for the architecture of the building as a whole is in place. Interior architecture can be used to completely re design, for example a room such as a kitchen, bathroom in a family home which is quite common or a meeting room or office layout in a business environment or modify the existing design based on original architecture.

    The interior architecture of a building can be changed for many reasons, either practical, where the interior of a building is going to be used for a new purpose or due to changing fashions or updated technologies. Examples of this are very common in many towns and cities where the exterior of a building is in a style of when it was built, say in the late 19th century but it’s interior has been completely re vamped incorporating modern design fashions and the latest technology.

    The use of interior architecture means that for many buildings over a hundred years old the development of the look and design of their interior and exterior could often be the work of many different architects or teams of architects. This has meant for many of our towns and cities the architecture on view can be widely varied and reflect many different periods of time, design fashions and architecture styles. Some of which can be seen as timeless whilst others from certain eras can be seen as garish and bad taste 20 – 30 years down the line.

    However no matter what a buildings exterior may look like with the help of interior architects, refurbishment and fit out specialists the interior look and feel of many buildings can be totally transformed with enough time and money bringing them up to date, that is until the latest style, fashion and technologies need integrating a few years down the line.

    The main thing to differentiate architecture + interior architecture is that an architect is concerned with the concept of designing a new building the interior architect is concerned with the modification of existing buildings, some of which the design can be seen as timeless and look good for centuries whilst other will be an eye saw and look dated within 10 – 30 years.

    This is quite a large and interesting topic, for further reading would advise looking at books + articles, online, in bookshops, news agents or in libraries on architecture, design + interior design.
    415 Words

  • September 19, 2017 /  Architecture
    images3

    In the architectural world, just as in the worlds of food, clothing, and design, as styles come together we have whats called fusion. In fusion, often disparate elements come together to create a cohesive union, and sometimes seemingly harmonious elements come together in a not so harmonious way. In terms of architecture, a truly interesting blend happened in the beginning of the 20th century, melding together the elements of Spanish Mission revival style with the hip sleekness of Art Deco.

    Art Deco buildings are known for their futuristic, sleek, dramatic, geometric flair. Cubes, zigzags, and futuristic chic came together to express the growing machine age in the United States. In the roaring twenties and early thirties, the jazzy Art Deco architecture was sweeping the nation. The Art Deco style found its inspiration from many different sources. The austere shapes and curves were taken from the Bauhaus School and the streamlined modern technology-looking design was melded with images of icons from the Far East, Greece, Rome, Africa, India, and Mayan and Aztec cultures. But above all these, Art Deco took inspiration from an architectural discovery in Egypt.

    In 1922, archaeologist Howard Carter and his sponsor, Lord Carnarvon, thrilled the world with their discovery of the tomb of King Tutankhamen. Egypt-chic soon swept the nation and influenced the design of clothes, jewelry, furniture and graphic design. And of course, architecture.

    Another style that was popping-up at the same time was the Spanish Mission Revival style, and in California, these two disparate styles found a way to come together in harmony as Hollywood actors were clamoring to get their homes built in the chic Spanish style. California isnt the only place to see the beautiful union of these two styles.
    Hawkes Bay has some tremendous Art Deco and Spanish Mission Walks. Hawkes Bay is located in Napier, New Zealand. Following a devastating earthquake in 1931, the whole commercial heart of Napier was destroyed, but the city was about to be reborn in the newest architectural style, and to become the hottest city. In Hawkes Bay, you get to see all the styles right next to each other: Spanish Classic, Spanish mission, and Art Deco, all side by side.

    There are also places in the United States that show this great mixture of styles and iconographies. Take for example a lovely Spanish Revival building in St. Louis, by the architect T.P. Barnett, son of George I. Barnett, another famous architect in St. Louis. The T.P. Barnett building is particularly interesting because it also has Art Deco influences, making it one of the most unique buildings in the Grand Center region of St. Louis. Certainly the next time youre in St. Louis, you need to visit this Spanish Revival building on Washington Avenue.

  • September 3, 2017 /  Architecture
    images11

    Being elderly and needing daily support from a long term residential care facility doesnt mean your accommodation has to be plain, unstylish, boring, or worse – institutional. With a diverse selection of affordable architectural styles today, even long term care accommodation can let go of the utilitarian architecture and begin with a fresh new start of appealing design that reflects a home-like atmosphere in a functional package.

    Designing senior living with a reflection of the past, a base of the practical present and a touch of the future are sure to meet the needs of the aging population as it continues to grow. The senior consumer of the future will come with many profiles and will be looking for living arrangements that reflect a wide expanse of taste, living requirements and values, at a range of price points from affordable to extravagant.

    If you had the option to design and build your own home, or a facility that would become your home, wouldnt you let your imagination run wild and creativity soar to include and consider the many possible design options that exist in the resource bank of architecture?

    Architecture today is a wide-open array of taste from the old world style with the accents of stone and stucco, tile roofs and heavy beams all very suitable to homebuyers looking for a connection to the historic past. A farmhouse or a country home with simple floor plans, warm colours and cozy spaces would please many individuals looking for a connection to an era of not so long ago. Ranch style homes of the 1950s are ever popular for those looking for a one floor living plan who are not afraid to recapture a retro look, or something more open with glass such as garden doors opening onto a landscaped patio or view of a park like backyard. Designing for seniors means paying attention to details such as uncluttered hallways and wheelchair accessible traffic zones, but it doesnt preclude the designer from planning style and space that feels like home.

    Working with an architect to bring together your design ideas, your creativity, an outline of what your needs may be for comfort, space, budget, maintenance and functionality, are all necessary details and requirements that go in to the design of a building that not only serves its occupants but feels inviting like home.

  • July 25, 2017 /  Architecture
    home19

    Information architecture is defined as the outline or blueprint that describes how data and information is systematized, ordered, and controlled. Another definition of information architecture says that it is a system of spotting, managing, and controlling patterns in data. This data-handling technology aims to be able to make complex, ambiguous, and fuzzy sets of information, data, and other resources as simple and as understandable as they can be.

    According to a business-related site, it has been unfortunate in these modern times that most business companies struggle in terms of the use of the technology of information architecture. Actually, some businesses are having difficulties even with the most basic applications of information. A significant quantity of companies still experiences difficulties in getting up-to-date, comprehensive, precise, and accurate views of the results of the projects and actions they have done previously. Companies now just create proposals for new, innovative, predictive, and analytical transformation and differentiation in terms of information handling and architecture in a diminishing effort. The result of this failure of the companies to value the technology being delivered by information architecture leads to the struggles they experience that are stated in this article. e.

    Companies that are struggling in executing information architecture processes need to adapt a new one that suits their needs the best. In choosing a new style of information architecture, they must bear in mind that in the world of technology, the amount of information and data inputted into the Web is growing in a much rapid way. Also, the speed at which information is received has gone significantly faster than before. Data comes in various types, so an information architecture system must be flexible to such variety of files.

    Automation is in demand these days. To learn more about IC693DSM302 and IC693DSM314, check online and be informed about GE Fanuc PLC.

  • July 19, 2017 /  Architecture
    home7

    In today’s world of instant gratification, Architecture Animation is providing a virtual tour of the property in a future-completed state can be a very intense and emotional experience although it is in the concept stage in reality. Animation usually begins with the panoramic representation of the external features that include landscaping, hedges, fences, roads and exterior surroundings in general. The exterior view of the building shows the faade where architecture, materials and design can be understood. Architectural Animation is a small architectural movie created on a computer. An architectural animation is a series of hundreds or even thousands of still images. When these images are assembled and played back they produce a movie effect much like a real movie. The Architectural Animation project consisted of exterior and interior Visuals to help with design approval. The Architectural Development was accurately shown within the Architectural Visualizations and the Architectural Animation. It is possible to add a computer-created environment around the building to enhance reality and to better convey its relationship to the surrounding area; this can all be done before the project is built giving designers and stakeholders a realistic view of the completed project. Architectural Animation is now a key part in Architectural Project Development. In recent years the accelerating importance of animation in communicating architecture, it can take shape in a variety of ways – slick animated renderings bringing a prospective project to life, a finished project layered with music and a narrative bringing the emotive dimensions of a building to the surface, and even the purely conceptual expression of architecture as an artistic exploration. They represent an animation object of architecture by taking into consideration various geometrical entities and rules. Architecture Animation are made with focusing heavily on different factors like width, height, breadth, lines, surface with curves of building components. Considering in the avenue of film or in current events how time and cost consuming it could be to recreate an event. The architecture animation allows artists to create these events using models, than rendering the models, which provides life into the structure to create a sequence of events. Imagine that you want to make your building better than others in an effective manner. Then you will need something to make you very clear about how to build your proposed building structure. If you have some kind animation of your building well before it gets constructed, then it becomes a lot easier for you to achieve your goal. Animated buildings and animated interiors design for buildings are the best suitable option for you to do this.

  • July 11, 2017 /  Architecture
    home19

    D printing technology is used to manufacture prototypes, tools, and end-user parts directly from a CAD design. This printing technology offers unprecedented flexibility as it can create a part of any dimension out of any material. Some of the 3d printing materials used include metals, polymers, ceramics, composites, and many more. The 3D printing technology has complete control over material composition, surface texture, and micro-structure of the prototype. 3D printing technology also allows the user to construct prototypes using two different materials. >

    Lets take a look at this amazing technology and how it has affected the field of architecture and medicine:

    3D printing for Architecture

    Architects know that there is nothing like a physical model of a building when it comes to displaying their work or design concept. Physical models also play an important role when it comes to explaining and convincing the customer while selling a project.

    3D printers are affordable and high quality solutions for architects. Building a physical model requires great deal of expertise, precision, and time. 3D printing machines help designers focus on their building design, while the devices make 3D models of the project.

    Many architects are not tech-savvy and are not used to operating complex devices. 3D printers do not require human intervention at any stage of the printing process. Architects just need to need to draw a CAD diagram of the project and instruct the 3D printer to build a 3D model. The 3D printer can print the model within a few hours, which can then be presented to the client.

    3D printers are capable of producing of 3D models with accuracy and speed without compromising on the finer details of the architectural project. The price of desktop 3D printing machines is not that high and independent architects can also afford them.

    3D printing for Medicine

    The application of 3D printing technology can also be found in the production of medical devices. There are different 3D printing materials available that can be used to build real parts. For example, manufacturing hearing aids is a complex process because they are custom-fit devices and cannot be mass produced. 3D printing greatly helps in such matters where medical devices need to custom-fit a patient.

    The future of the 3D printing technology is very bright. Market experts state that 3D printing technology will be affordable to the masses by the next decade. The prices of 3D printing devices are falling rapidly, and it is believed that the prices of 3D printers will drop by as much as 80% in the next 5-10 years. It will not be a surprise to see 3D printing devices in each household just like refrigerators, washing machines, and televisions.

  • July 6, 2017 /  Architecture
    home10

    The Cisco IP Next-Generation Network (IP NGN) Structure Skills shows knowledge the IP NGN architecture, from revenue to support. The Innovative IP Next-Generation Network Structure Skills is not currently required for qualifications, but is optionally available for Gold and Leading qualified associates. We are also flying the addition of this specialization as an option for Gold Certification.

    Is your organization interested in taking full advantage of the Cisco Innovative IP NGN Structure Skills for Gold Certification? If so, deliver an email that contains your associate organization name and a member of the program staff will contact you with more details.
    Cisco IP NGN Structure Skills helps your company:

    Develop revenue, specialized and service abilities for incorporated social media solutions

    Increase specialized proficiency internally

    Gain identification as a specialized associate in the Cisco Partner Locator

    Explore IP NGN resources
    This specialization also allows you to a range of additional benefits. You can:

    Participate in Cisco route motivation programs

    Receive invites to Cisco subsidized associate activities

    Access Partner Knowledge Connection

    Use My Cisco to customize web content and get details quickly

    Send an argument stating your accomplishment

    Visit the Cisco Design Area for examined styles and configurations
    Exam 650-756

    Examination 650-756 includes 60 concerns and time permitted to finish this exam is 60 moments or 1 time. This exam is available in British terminology. Candidates can sign-up for this exam at any Pearson VUE middle.

    The 650-756 Innovative IP Next-Generation Network (NGN) Structure Area Professional (PANGNFE) examinations will determine a learner’s understanding of the Cisco IP NGN architecture and capability to map specialized alternatives to company needs. You will also need to show a knowing of the different foundations of the Cisco IP NGN architecture. This exam is a need of the Innovative IP NGN Structure Expertise for Area Technical engineers. Quality will determine a learner’s capability to provide an obvious and powerful concept around the functions, functions and advantages of the Cisco IP NGN architecture in business-focused conditions. It will also analyze a learner’s capability to evaluate typical problems throughout a company that Cisco IP NGN architecture can help fix and efficiency in introducing company influencers for Cisco IP NGN architecture programs.
    650-754 Exam Topics

    The following subjects are typical recommendations for the articles likely to be involved on the examination. However, other relevant subjects may also appear on any particular distribution of the examination. To be able to better indicate the 650-754 material of the examination and for quality requirements, the recommendations below may modify whenever without observe. They include:

    Describe Cisco IP NGN conditions and advantages
    Describe Cisco IP NGN alternatives and how to arrange them with client needs
    Describe typical client objections
    Describe the aggressive surroundings and how to place Cisco IP NGN solutions
    Describe how to create and existing Cisco IP NGN alternatives as a company situation to the customer
    Describe the company and specialized advantages of the Cisco IP NGN architecture
    Describe the company individuals for Cisco IP NGN structure applications